Edit: /usr/sbin/mkdumprd (12418B)
#!/usr/bin/bash --norc
# New mkdumprd
#
# Copyright 2011 Red Hat, Inc.
#
# Written by Cong Wang
#
if [[ -f /etc/sysconfig/kdump ]]; then
. /etc/sysconfig/kdump
fi
[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
. $dracutbasedir/dracut-functions.sh
. /lib/kdump/kdump-lib.sh
. /lib/kdump/kdump-logger.sh
export IN_KDUMP=1
#initiate the kdump logger
if ! dlog_init; then
echo "failed to initiate the kdump logger."
exit 1
fi
SSH_KEY_LOCATION="/root/.ssh/kdump_id_rsa"
SAVE_PATH=$(get_save_path)
OVERRIDE_RESETTABLE=0
extra_modules=""
dracut_args=(--quiet --hostonly --hostonly-cmdline --hostonly-i18n --hostonly-mode strict --hostonly-nics '')
MKDUMPRD_TMPDIR="$(mktemp -d -t mkdumprd.XXXXXX)"
[ -d "$MKDUMPRD_TMPDIR" ] || perror_exit "dracut: mktemp -p -d -t dracut.XXXXXX failed."
MKDUMPRD_TMPMNT="$MKDUMPRD_TMPDIR/target"
trap '
ret=$?;
is_mounted $MKDUMPRD_TMPMNT && umount -f $MKDUMPRD_TMPMNT;
[[ -d $MKDUMPRD_TMPDIR ]] && rm --one-file-system -rf -- "$MKDUMPRD_TMPDIR";
exit $ret;
' EXIT
# clean up after ourselves no matter how we die.
trap 'exit 1;' SIGINT
add_dracut_arg()
{
dracut_args+=("$@")
}
add_dracut_mount()
{
add_dracut_arg "--mount" "$1"
}
add_dracut_sshkey()
{
add_dracut_arg "--sshkey" "$1"
}
# caller should ensure $1 is valid and mounted in 1st kernel
to_mount()
{
local _target=$1 _fstype=$2 _options=$3 _sed_cmd _new_mntpoint _pdev
_new_mntpoint=$(get_kdump_mntpoint_from_target "$_target")
_fstype="${_fstype:-$(get_fs_type_from_target "$_target")}"
_options="${_options:-$(get_mntopt_from_target "$_target")}"
_options="${_options:-defaults}"
if [[ $_fstype == "nfs"* ]]; then
_pdev=$_target
_sed_cmd+='s/,\(mount\)\?addr=[^,]*//g;'
_sed_cmd+='s/,\(mount\)\?proto=[^,]*//g;'
_sed_cmd+='s/,clientaddr=[^,]*//;'
else
# for non-nfs _target converting to use udev persistent name
_pdev="$(kdump_get_persistent_dev "$_target")"
if [[ -z $_pdev ]]; then
return 1
fi
fi
# mount fs target as rw in 2nd kernel
_sed_cmd+='s/\(^\|,\)ro\($\|,\)/\1rw\2/g;'
# with 'noauto' in fstab nfs and non-root disk mount will fail in 2nd
# kernel, filter it out here.
_sed_cmd+='s/\(^\|,\)noauto\($\|,\)/\1/g;'
# drop nofail or nobootwait
_sed_cmd+='s/\(^\|,\)nofail\($\|,\)/\1/g;'
_sed_cmd+='s/\(^\|,\)nobootwait\($\|,\)/\1/g;'
_options=$(echo "$_options" | sed "$_sed_cmd")
echo "$_pdev $_new_mntpoint $_fstype $_options"
}
#Function: get_ssh_size
#$1=dump target
#called from while loop and shouldn't read from stdin, so we're using "ssh -n"
get_ssh_size()
{
local _out
local _opt=("-i" "$SSH_KEY_LOCATION" "-o" "BatchMode=yes" "-o" "StrictHostKeyChecking=yes")
if ! _out=$(ssh -q -n "${_opt[@]}" "$1" "df" "--output=avail" "$SAVE_PATH"); then
perror_exit "checking remote ssh server available size failed."
fi
echo -n "$_out" | tail -1
}
#mkdir if save path does not exist on ssh dump target
#$1=ssh dump target
#caller should ensure write permission on $1:$SAVE_PATH
#called from while loop and shouldn't read from stdin, so we're using "ssh -n"
mkdir_save_path_ssh()
{
local _opt _dir
_opt=(-i "$SSH_KEY_LOCATION" -o BatchMode=yes -o StrictHostKeyChecking=yes)
ssh -qn "${_opt[@]}" "$1" mkdir -p "$SAVE_PATH" &> /dev/null ||
perror_exit "mkdir failed on $1:$SAVE_PATH"
# check whether user has write permission on $1:$SAVE_PATH
_dir=$(ssh -qn "${_opt[@]}" "$1" mktemp -dqp "$SAVE_PATH" 2> /dev/null) ||
perror_exit "Could not create temporary directory on $1:$SAVE_PATH. Make sure user has write permission on destination"
ssh -qn "${_opt[@]}" "$1" rmdir "$_dir"
return 0
}
#Function: get_fs_size
#$1=dump target
get_fs_size()
{
df --output=avail "$(get_mntpoint_from_target "$1")/$SAVE_PATH" | tail -1
}
#Function: get_raw_size
#$1=dump target
get_raw_size()
{
fdisk -s "$1"
}
#Function: check_size
#$1: dump type string ('raw', 'fs', 'ssh')
#$2: dump target
check_size()
{
local avail memtotal
memtotal=$(awk '/MemTotal/{print $2}' /proc/meminfo)
case "$1" in
raw)
avail=$(get_raw_size "$2")
;;
ssh)
avail=$(get_ssh_size "$2")
;;
fs)
avail=$(get_fs_size "$2")
;;
*)
return
;;
esac || perror_exit "Check dump target size failed"
if [[ $avail -lt $memtotal ]]; then
dwarn "Warning: There might not be enough space to save a vmcore."
dwarn " The size of $2 should be greater than $memtotal kilo bytes."
fi
}
check_save_path_fs()
{
local _path=$1
if [[ ! -d $_path ]]; then
perror_exit "Dump path $_path does not exist."
fi
}
mount_failure()
{
local _target=$1
local _mnt=$2
local _fstype=$3
local msg="Failed to mount $_target"
if [[ -n $_mnt ]]; then
msg="$msg on $_mnt"
fi
msg="$msg for kdump preflight check."
if [[ $_fstype == "nfs" ]]; then
msg="$msg Please make sure nfs-utils has been installed."
fi
perror_exit "$msg"
}
check_user_configured_target()
{
local _target=$1 _cfg_fs_type=$2 _mounted
local _mnt _opt _fstype
_mnt=$(get_mntpoint_from_target "$_target")
_opt=$(get_mntopt_from_target "$_target")
_fstype=$(get_fs_type_from_target "$_target")
if [[ -n $_fstype ]]; then
# In case of nfs4, nfs should be used instead, nfs* options is deprecated in kdump.conf
[[ $_fstype == "nfs"* ]] && _fstype=nfs
if [[ -n $_cfg_fs_type ]] && [[ $_fstype != "$_cfg_fs_type" ]]; then
perror_exit "\"$_target\" have a wrong type config \"$_cfg_fs_type\", expected \"$_fstype\""
fi
else
_fstype="$_cfg_fs_type"
_fstype="$_cfg_fs_type"
fi
# For noauto mount, mount it inplace with default value.
# Else use the temporary target directory
if [[ -n $_mnt ]]; then
if ! is_mounted "$_mnt"; then
if [[ $_opt == *",noauto"* ]]; then
mount "$_mnt" || mount_failure "$_target" "$_mnt" "$_fstype"
_mounted=$_mnt
else
perror_exit "Dump target \"$_target\" is neither mounted nor configured as \"noauto\""
fi
fi
else
_mnt=$MKDUMPRD_TMPMNT
mkdir -p "$_mnt"
mount "$_target" "$_mnt" -t "$_fstype" -o defaults || mount_failure "$_target" "" "$_fstype"
_mounted=$_mnt
fi
# For user configured target, use $SAVE_PATH as the dump path within the target
if [[ ! -d "$_mnt/$SAVE_PATH" ]]; then
perror_exit "Dump path \"$SAVE_PATH\" does not exist in dump target \"$_target\""
fi
check_size fs "$_target"
# Unmount it early, if function is interrupted and didn't reach here, the shell trap will clear it up anyway
if [[ -n $_mounted ]]; then
umount -f -- "$_mounted"
fi
}
# $1: core_collector config value
verify_core_collector()
{
local _cmd="${1%% *}"
local _params="${1#${_cmd}}"
if [[ $_cmd != "makedumpfile" ]]; then
if is_raw_dump_target; then
dwarn "Warning: specifying a non-makedumpfile core collector, you will have to recover the vmcore manually."
fi
return
fi
if is_ssh_dump_target || is_raw_dump_target; then
if ! strstr "$_params" "-F"; then
perror_exit 'The specified dump target needs makedumpfile "-F" option.'
fi
_params="$_params vmcore"
else
_params="$_params vmcore dumpfile"
fi
# shellcheck disable=SC2086
if ! $_cmd --check-params $_params; then
perror_exit "makedumpfile parameter check failed."
fi
}
add_mount()
{
local _mnt
_mnt=$(to_mount "$@") || exit 1
add_dracut_mount "$_mnt"
}
#handle the case user does not specify the dump target explicitly
handle_default_dump_target()
{
local _target
local _mntpoint
is_user_configured_dump_target && return
check_save_path_fs "$SAVE_PATH"
_save_path=$(get_bind_mount_source "$SAVE_PATH")
_target=$(get_target_from_path "$_save_path")
_mntpoint=$(get_mntpoint_from_target "$_target")
SAVE_PATH=${_save_path##"$_mntpoint"}
add_mount "$_target"
check_size fs "$_target"
}
# $1: function name
for_each_block_target()
{
local dev majmin
for dev in $(get_kdump_targets); do
[[ -b $dev ]] || continue
majmin=$(get_maj_min "$dev")
check_block_and_slaves "$1" "$majmin" && return 1
done
return 0
}
#judge if a specific device with $1 is unresettable
#return false if unresettable.
is_unresettable()
{
local path device resettable=1
path="/sys/$(udevadm info --query=all --path="/sys/dev/block/$1" | awk '/^P:/ {print $2}' | sed -e 's/\(cciss[0-9]\+\/\).*/\1/g' -e 's/\/block\/.*$//')/resettable"
if [[ -f $path ]]; then
resettable="$(< "$path")"
[[ $resettable -eq 0 ]] && [[ $OVERRIDE_RESETTABLE -eq 0 ]] && {
device=$(udevadm info --query=all --path="/sys/dev/block/$1" | awk -F= '/DEVNAME/{print $2}')
derror "Error: Can not save vmcore because device $device is unresettable"
return 0
}
fi
return 1
}
#check if machine is resettable.
#return true if resettable
check_resettable()
{
local _target _override_resettable
_override_resettable=$(kdump_get_conf_val override_resettable)
OVERRIDE_RESETTABLE=${_override_resettable:-$OVERRIDE_RESETTABLE}
if [ "$OVERRIDE_RESETTABLE" != "0" ] && [ "$OVERRIDE_RESETTABLE" != "1" ]; then
perror_exit "override_resettable value '$OVERRIDE_RESETTABLE' is invalid"
fi
for_each_block_target is_unresettable && return
return 1
}
if ! check_resettable; then
exit 1
fi
# firstly get right SSH_KEY_LOCATION
keyfile=$(kdump_get_conf_val sshkey)
if [[ -f $keyfile ]]; then
# canonicalize the path
SSH_KEY_LOCATION=$(/usr/bin/readlink -m "$keyfile")
fi
while read -r config_opt config_val; do
# remove inline comments after the end of a directive.
case "$config_opt" in
extra_modules)
extra_modules="$extra_modules $config_val"
;;
ext[234] | xfs | btrfs | minix | nfs | virtiofs)
check_user_configured_target "$config_val" "$config_opt"
add_mount "$config_val" "$config_opt"
;;
raw)
# checking raw disk writable
dd if="$config_val" count=1 of=/dev/null > /dev/null 2>&1 || {
perror_exit "Bad raw disk $config_val"
}
_praw=$(persistent_policy="by-id" kdump_get_persistent_dev "$config_val")
if [[ -z $_praw ]]; then
exit 1
fi
add_dracut_arg "--device" "$_praw"
check_size raw "$config_val"
;;
ssh)
if strstr "$config_val" "@"; then
mkdir_save_path_ssh "$config_val"
check_size ssh "$config_val"
add_dracut_sshkey "$SSH_KEY_LOCATION"
else
perror_exit "Bad ssh dump target $config_val"
fi
;;
core_collector)
verify_core_collector "$config_val"
;;
dracut_args)
# When users specify nfs dumping via dracut_args, kexec-tools won't
# mount nfs fs beforehand thus nfsv4-related drivers won't be installed
# because we call dracut with --hostonly-mode strict. So manually install
# nfsv4-related drivers.
if [[ $(get_dracut_args_fstype "$config_val") == nfs* ]]; then
add_dracut_arg "--add-drivers" nfs_layout_nfsv41_files
fi
while read -r dracut_arg; do
add_dracut_arg "$dracut_arg"
done <<< "$(echo "$config_val" | xargs -n 1 echo)"
;;
*) ;;
esac
done <<< "$(kdump_read_conf)"
handle_default_dump_target
if ! have_compression_in_dracut_args; then
if is_squash_available && dracut_have_option "--squash-compressor"; then
add_dracut_arg "--squash-compressor" "zstd"
elif is_zstd_command_available; then
add_dracut_arg "--compress" "zstd"
fi
fi
if [[ -n $extra_modules ]]; then
add_dracut_arg "--add-drivers" "$extra_modules"
fi
# TODO: The below check is not needed anymore with the introduction of
# 'zz-fadumpinit' module, that isolates fadump's capture kernel initrd,
# but still sysroot.mount unit gets generated based on 'root=' kernel
# parameter available in fadump case. So, find a way to fix that first
# before removing this check.
if ! is_fadump_capable; then
# The 2nd rootfs mount stays behind the normal dump target mount,
# so it doesn't affect the logic of check_dump_fs_modified().
is_dump_to_rootfs && add_mount "$(to_dev_name "$(get_root_fs_device)")"
add_dracut_arg "--no-hostonly-default-device"
if fips-mode-setup --is-enabled 2> /dev/null; then
add_dracut_arg --add-device "$(findmnt -n -o SOURCE --target /boot)"
fi
fi
# This is RHEL-only to work around nvme problem, then real fix should go to dracut
if [[ -d /sys/module/nvme ]]; then
add_dracut_arg "--add-drivers" "nvme"
fi
# Use kdump managed dracut profile.
[[ $kdump_dracut_confdir ]] || kdump_dracut_confdir=/lib/kdump/dracut.conf.d
if [[ "$(dracut --help)" == *--add-confdir* ]] && [[ -d "$kdump_dracut_confdir" ]]; then
dracut_args+=("--add-confdir" "$kdump_dracut_confdir")
else
dracut_args+=(--add kdumpbase)
dracut_args+=(--omit "plymouth resume ifcfg earlykdump")
fi
dracut "${dracut_args[@]}" "$@"
_rc=$?
sync
exit $_rc